INDUSTRIAL & WAREHOUSE ROOFING · CHARLOTTE, NC
Industrial & Warehouse Roofing in Charlotte, NC — Distribution, Manufacturing & Large-Format Roofs
When your roof covers acres of inventory, equipment, and people, downtime and leaks get expensive fast. 365 Roofs installs, restores, repairs, and maintains large-format low-slope and metal roof systems on warehouses, distribution centers, and manufacturing plants across North Carolina — big-membrane TPO and EPDM, standing-seam metal, and coatings that extend roof life without shutting you down. Licensed and insured.
Industrial & Large-Format Roofing
Roofing Built for the Scale of Carolina Industry
The Charlotte region sits on the I-85 and I-77 corridors, and it’s covered in warehouses, distribution centers, and manufacturing plants — buildings whose roofs are measured in acres, not squares. At that scale, everything is bigger: bigger membranes, bigger investments, bigger consequences when a leak lands on stored inventory, a production line, or sensitive equipment. 365 Roofs handles industrial and warehouse roofing across North Carolina — large-format low-slope installs, metal systems, restoration, coatings, and leak repair — with the crews, equipment, and planning that jobs this size demand.
Industrial roofs also come with more of everything on the roof itself: rows of skylights, mechanical curbs, exhaust fans, conduit, and dozens or hundreds of penetrations, all of which are potential leak points that have to be detailed correctly. We install and service the systems that hold up over big buildings in NC’s heat, humidity, and hail, and we plan the work to keep your operation running underneath.
Systems at Scale
Large-Format Roof Systems We Install & Service
Large-Format TPO
Reflective single-ply in wide sheets that install efficiently over big roofs — energy-efficient and cost-effective for warehouses and distribution centers.
EPDM
A durable, long-life rubber membrane that’s a proven workhorse over large low-slope industrial decks.
Standing-Seam & Metal
Structural and standing-seam metal for long-life industrial roofs and re-cover over existing metal — decades of service that shed hail and heat.
Coatings & Restoration
Fluid-applied silicone and acrylic systems that renew an aging roof, seal seams and penetrations, and add years of life at a fraction of tear-off cost.
Modified Bitumen & BUR
Tough multi-ply systems for decks with heavy rooftop traffic and mechanical activity.
Repair & Leak Detection
Fast diagnosis and repair of leaks, seam failures, punctures, and storm damage across large roof areas.
Extend, Don’t Replace
Restoration & Coatings to Stretch a Big Roof
Replacing an acre-scale roof is a major capital event. When the deck is sound and the membrane is simply tired, restoration is often the smarter move: we repair the trouble spots, re-detail the penetrations, and apply a reflective silicone or acrylic coating system that waterproofs the field and can add 10 to 20 years of service — frequently with a renewed manufacturer warranty and lower cooling costs from the reflective surface.
The best part for an operations team: coatings and restoration are far less disruptive than a tear-off — less noise, less debris, and no exposed deck over your inventory. We’ll tell you honestly whether your roof is a restoration candidate or genuinely needs replacement.
The Details That Leak
Skylights, Curbs & Penetrations
On an industrial roof, the field membrane is rarely the problem — the penetrations are. We build and maintain the details that keep big roofs dry:
- Skylights & smoke hatches — flashed and sealed against wind-driven rain
- Mechanical curbs & RTUs — the most common industrial leak source, detailed to spec
- Exhaust fans, vents & conduit — sealed penetrations across the whole roof
- Drains, scuppers & internal gutters — kept clear so acres of water drain, not pond
- Expansion joints & parapets — built to move with a large building
For Facility & Operations Managers
Get an Industrial Roof Assessment
Chasing leaks over inventory, or budgeting a large capital project? We’ll survey the roof and give you clear, written options.
Keeping You Running
Roofing Around a Working Operation
A distribution center can’t stop shipping and a plant can’t stop producing while the roof gets worked on. We plan around your operation.
- Phased areas — we work over one section at a time to keep the rest of the building in service
- Interior protection — inventory, lines, and equipment shielded from dust and debris
- Dock & access coordination — deliveries staged to keep your loading docks and yard clear
- Off-shift work — scheduling around production and shipping windows where possible
Safety First
Safety on a Big Roof
Height, scale, and rooftop equipment make industrial roofs a serious safety environment. We run controlled, safety-minded job sites — fall protection, secured materials and staging, protected skylights and openings, and clear ground zones below — to protect our crews, your employees, and your building throughout the project.
We’re licensed and insured, and we hold our crews to the standards a working industrial facility requires.
Storm & Insurance
Storm Damage Over Acres of Roof
A hailstorm or high wind event can damage an enormous industrial roof in minutes, and the damage often hides until inventory gets wet. We inspect large roofs for storm damage, document it across the whole area with photos, and can coordinate with your insurance adjuster on a covered claim — see our storm & hail damage and insurance claim help pages.
Serving All of NC
Industrial Roofing Across North Carolina
From Charlotte we roof industrial buildings along the I-85 and I-77 corridors — Concord, Kannapolis, Gastonia, Mooresville, and the greater Metrolina region — plus the Raleigh–Durham Triangle, the Greensboro–Winston-Salem Triad, and Hickory, Salisbury, Fayetteville, and Wilmington. Explore our full commercial roofing capabilities or call to discuss your facility.
Industrial Roofing FAQ
Warehouse & Industrial Roof Questions, Answered
Can you roof our warehouse without stopping operations?
Yes. We phase the work over one section of the roof at a time so the rest of the building stays in service, protect inventory and equipment below, coordinate deliveries to keep your docks clear, and schedule around production and shipping windows where possible. The goal is a dry new roof with minimal downtime.
Our big roof leaks but seems mostly okay — can we avoid a full replacement?
Often, yes. On large industrial roofs the leaks usually come from penetrations — curbs, skylights, seams — not a failed field membrane. If the deck is sound, we can repair the trouble spots and apply a restorative coating system that waterproofs and reflects heat, adding 10 to 20 years at a fraction of tear-off cost and disruption.
What roof system is best for a large distribution center?
Large-format TPO and EPDM are the most common choices for big low-slope roofs — TPO for its reflective, energy-efficient surface and EPDM for long-life durability. Metal suits certain structures, and coatings restore aging roofs. The right pick depends on your building, rooftop equipment, and how long you plan to hold it; we’ll recommend the best fit.
How do you handle safety on a large industrial roof?
We run controlled, safety-minded job sites with fall protection, secured staging and materials, protected skylights and roof openings, and clear ground zones below. We’re licensed and insured and hold our crews to the standards a working industrial facility requires — protecting our people, your employees, and your building.
FREE INDUSTRIAL ROOF ASSESSMENT
Protect Your Facility, Your Inventory, and Your Uptime
Tell us about your warehouse, distribution center, or plant and we’ll schedule an assessment with clear, written options.